sku#2924 LILAC Metallic single, paint -12 grams

sku#2924 LILAC Metallic single, paint -12 grams

 LILAC Metallic single, paint - 12 grams
The Metallic should be fired first since you need to fire at 014. Wear a mask, safety glasses and gloves and preferably do this work outside.  Tape off the selections where you want the metallic. Place a piece of paper under your porcelain. Brush on MX54 or a drying medium, then use a sponge to even out medium until you hear the sound of it being tacky. Pour a generous amount of Metallic powder over the tacky medium. Gently press the Metallic powder in with a cotton ball. Take a soft mop brush and gently remove the excess Metallic powder onto your white paper. Take care not to scratch into the Metallic powder which has adhered to the porcelain. Set aside your plate to dry completely. Return the excess Metallic powder on the white paper back into the bottle to use another time. After the Metallic on the porcelain has completely dried approximately 30 minutes, which depends on your weather and choice of drying medium you use, remove the tape on the plate and fire at cone 014.  The nice thing about this application of the Metallic is, that if you scratch it or make a mistake before it's fired, you can clean the Metallic off the porcelain with alcohol and start over again.  List of supplies are shown on the  METALLIC SET OF 12,  tab.
$15.00 $13.00